ComAp InteliGenNT

ComAp’s InteliGen NT is a sophisticated high-end range genset controller for single and multiple gensets operating in standby or parallel modes.

Compact construction is optimized for these purposes and various HW modifications allow customers to select the optimum type for a particular application.

A built-in synchronizer and digital isochronous load sharer allow a total integrated solution for gen-sets in standby, island parallel or mains parallel. Native cooperation of up to 32 gen-sets is a standard feature.

InteliGenNT also supports many standard ECU types and is specially designed to easily integrate new ones.

A powerful graphic display with user-friendly controls allows any user whatever their ability to find the information they need.


Firmware Update

The IGS-NT-3.8 Firmware released April 2017 now has the facility for Full External Breaker control. This setpoint is in Process Ctrl – CB Ctrl Mode. This setpoint can be forced externally.

Selections are:

  • INTERNAL –  This is full ComAp control Mode.  No external open/close is allowed.  GCB fail will be generated if opened or closed externally.
  • FOLLOW – The ComAp still controls opening and closing, but it will not react to an external opening of the GCB.
  • EXTERNAL –  The ComAp does not provide Open/Close outputs.  It allows all control to be done externally.


What are the main features of the InteliGen NT?

  • Complete integrated gen-set solution and signal sharing via CAN bus – minimum external components needed.
  • Many communication options – easy remote supervising and servicing.
  • Built-in PLC function.
  • Support of engines with ECU (J1939, Modbus and other proprietary interfaces).
  • AMF function.
  • Automatic synchronizing and power control (via speed governor or ECU).
  • Baseload, Import/Export.
  • Peak shaving.
  • Voltage and PF control (AVR).
  • Generator measurement: U, I, Hz, kW, kVAr, kVA, PF, kWh, kVAhr.
  • Mains measurement: U, I, Hz, kW, kVAr, PF.
  • Inputs and outputs configurable for various customer needs.
  • Controller redundancy.
  • RS232/RS485 interface with Modbus support.
    • Analog/GSM/ISDN/CDMA modem support; SMS messages; ECU Modbus interface.
  • Event-based history (up to 500 records) with customer-selectable list of stored values.
    • RTC; statistic values.
  • Integrated PLC programmable functions.
  • Interface to remote display unit (IG-Display LT GC).
  • Dimensions 180×120 mm (front panel).
  • Sealed to IP65.